Manuscript Number : NCAEAS4414

Fabrication of A Prototype for Condensation of Water on Metal Surface Using Peltier Modules

Authors(7) :-Pranay Dhongde, Akash Mohare, Saurabh Ganthade, Vaibhav Bhadang, Pratik Ajmire, Rohit Yadav, Prof. Md. Shakebuddin

Collection of water is an utmost and important necessity for our survival because 70% of our body is composed of it. The available water on earth can be estimated as 73% but only 10% of which is consumable. The available drinking water sources are from ground and fresh water bodies and rainwater harvesting as well. Here arises a need for better solution for water collection and its purification. Many distillation units are accompanied for filtration of water by evaporation, reverse osmosis and chemical compounds. In all this we always forget to mention another source of water that is the air. Appreciably, the air has a distinct property, i.e. there is some percent of water present in the air. During winter season, fog on car's windshield is because of condensation of water molecules present in the air. Despite being a hard task to extract water from humid air as it is required to cool it below its dew point temperature and it needs high amount of energy input thus it is a necessary to find new sources of energy. Thus there arises a need for research of moderate systems those would work on renewable energy sources like solar energy. Traditional VCRS cycles have harmed the nature since 1970s and despite their modifications there lies a risk for human life. Hence there is a need for other cooling systems like thermoelectric cooling and heating. Thus we had made use of one of the thermoelectric module i.e. peltier module. Currently we fabricated a prototype that is in a development stage for condensation of water.

Authors and Affiliations

Pranay Dhongde
Students of Mechanical Department Anjuman College of Engineering and Technology Nagpur, Maharashtra, India
Akash Mohare
Students of Mechanical Department Anjuman College of Engineering and Technology Nagpur, Maharashtra, India
Saurabh Ganthade
Students of Mechanical Department Anjuman College of Engineering and Technology Nagpur, Maharashtra, India
Vaibhav Bhadang
Students of Mechanical Department Anjuman College of Engineering and Technology Nagpur, Maharashtra, India
Pratik Ajmire
Students of Mechanical Department Anjuman College of Engineering and Technology Nagpur, Maharashtra, India
Rohit Yadav
Students of Mechanical Department Anjuman College of Engineering and Technology Nagpur, Maharashtra, India
Prof. Md. Shakebuddin
Associate professor of Mechanical Departent Anjuman College of Engineering and Technology Nagpur, Maharashtra, India

Peltier modules, reverse osmosis, thermoelectric cooling, condensation, dew point

  1. Us Naval Laboratory Technical Report (Unclassified Publish) “Heat Transfer Studies Of Drop Wise Condensation And Thin Film Evaporation. Ad No-410566.
  2. Umesh V Sangle “Thermo-Electric Refrigeration By Using Solar Energy For Domestic Appliance” Mechanical Engineering Department, Sssist, Bhopal.
  3. Kabeela A.E Abdulazizb M., Emad M.S. “Solar Based Atmospheric Water Generator Utilisation Of Fresh Water Recovery: A Numerical Study”,2014.
  4. Aditya Nandy, Sharmi Saha, Souradeep Ganguly “A Project On Atmospheric Water Generator With The Concept Of Peltier Effect”. International Journal Of Advanced Computer Research (Issn(Print): 2249-7277.
  5. O. Laguerre “Heat Transfer and Air Flow In A Domestic Refrigeration” Hal Id: Hal-00583230.
  6. Humidity Graph – Weather And Forecast Department, Nagpur.
  7. Kiran Powar & V.S.Shinde, “Performance Evaluation Of Solar Powered Peltier Condenser To Extract Water From Ambient Air.” International Engineering Research Journal, Special Issue 2 Page 607-6012,Issn-2395-1621
  8. Kiran Powar & V.S.Shinde, “ Performance Evaluation Of Solar Powered Peltier Condenser To Extract Water From Ambient Air.” International Engineering Research Journal, Special Issue 2 Page 607-6012, Issn-2395-1621.
  9. United States Patent – Patent Number 5203989 Date-Apr. 20, 1993.3

Publication Details

Published in : Volume 4 | Issue 3 | January-February 2018
Date of Publication : 2018-01-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 577-582
Manuscript Number : NCAEAS4414
Publisher : Technoscience Academy

Print ISSN : 2395-6011, Online ISSN : 2395-602X

Cite This Article :

Pranay Dhongde,Akash Mohare, Saurabh Ganthade, Vaibhav Bhadang, Pratik Ajmire, Rohit Yadav, Prof. Md. Shakebuddin, " Fabrication of A Prototype for Condensation of Water on Metal Surface Using Peltier Modules", International Journal of Scientific Research in Science and Technology(IJSRST), Print ISSN : 2395-6011, Online ISSN : 2395-602X, Volume 4, Issue 3, pp.577-582, January-February-2018.
Journal URL : https://ijsrst.com/NCAEAS4414
Citation Detection and Elimination     |      | | BibTeX | RIS | CSV

Article Preview